Components:
S1 x 1
Sphere Panel
S4 x 3
Green Side Tabs
S2 x 3
Rivets
S8 x 3
Pins
www.ecomposter.net
view from outside
With inside panel facing down, insert
three green S4 side tabs into slots on
the right side.
Place three S2 rivets into the holes in the
panel and the side tabs to hold in place.
Place an S8 pin into the hole in the center
of each rivet. The pin will slide half way
into the rivet. Insert the other two S8 pins.
Use a rubber mallet (or block of wood)
to create a brace. Hammer pin into each
rivet until flush.
Adjust mallet and hammer the other pins
into rivets until flush.
Prepare One Sphere Panel
NOTE: Green S4 side tabs are the same on both sides.
A
B
C
D
E
Inside of rivet expands
when pin is inserted.
view from inside
NOTE: Hammer pin until it is flush with the top of the
rivet and the rivet is flush with the hole in the panel.
Step 2:
3 of 18
