background image

www.ecomposter.net

16 of 18

USER GUIDE

Using Your 

Eco

mposter

About the 

Eco

mposter Design

How the 

Eco

mposter Works

How to Use the 

Eco

mposter

IMPORTANT: When full, the 

Eco

mposter sphere is heavy. Place the sphere on the optional 

base to prevent it from moving. Place the base on smooth, level ground. The 

Eco

mposter is 

not a toy. Make sure the lids are secure before rotating the sphere. DO NOT LIFT the sphere 
using the handles. Place your fingers in the holes in the sides of the sphere to lift. The handles 
are used to lock the outer lid into place.

!

Thank you for purchasing your 

Eco

mposter and optional base. We hope it provides you with many 

years of enjoyment. Please read this User Guide to get the most out of your 

Eco

mposter. 

Contact us with any questions at [email protected] or call (800) 293-2923.

The unique 

Eco

mposter sphere and patented air induction system is designed to speed up the 

composting process. The Ecomposter design optimizes the four key components of composting: 
heat, moisture, mixing and time.   

The sphere, with the lowest surface/volume of any shape, prevents heat loss while the dark 
green color attracts heat, promoting faster decomposition. The 360 degree rotation randomly 
blends material, keeping the compost moist and improves the mixing, aeration and 
decomposition process.

The large and patented air induction tubes provide a supply of oxygen into the center of the 
compost material, maintaining an optimal moisture level. As the sphere rotates, the air tubes 
break up and mix newly added materials with older materials.  

Before You Begin

Select a site for your 

Eco

mposter and optional base on level ground, with good airflow, 

access to water and partial shade in the summer and good sun in the winter.

The basic makeup of your initial material will determine both the speed and effectiveness 
of the decomposition process. These materials also establish the nutrient content of the finished 
compost. Do not try to make compost with one ingredient.

You will be adding materials in percentages. We recommend finding a bucket or cup to use as 
a measuring gauge. The composting process will take between 4 to 6 weeks depending on the 
ratio of materials, the moisture, heat and mixing schedule. Plants lose between 50 and 75 percent 
of their volume in composting, so a great deal of plant material can be processed effectively. 

The 

Eco

mposter sphere is designed with a large outer lid to add or remove larger materials and 

an inner lid for smaller amounts. Both use secure locking systems. Use the handles on the outer 
lid to lock it in place. Use the key to tighten the small inner lid. A rubber plug in the center of the 
inner lid can be easily removed to drain leachate, the liquid that forms during the decomposition 
process, to use for your garden. Both lids are on either axis of the sphere for easy access. Before 
rotating the sphere, make sure all the lids are closed tightly and the rubber plug is firmly in place. 
See Step 10 in the assembly manual for more detail.

Summary of Contents for Ecomposter





















Reviews: