The collar fits on the inside of the top of the sphere.
Gently pull the sphere apart to fit the collar UNDER
the top of the panel.
Assemble One Half Sphere
A
B
C
Step 4:
S5 x 1
Collar
Components:
S2 x 19
Rivets
S8 x 40
Pins
Starting with an open panel, place S2 rivets into
holes in the top panel and collar to hold in place.
Line up the holes in the collar with
the holes in the top of the panels.
Continue to line up the holes in the panels
with the holes in the collar and place rivets
to hold in place. ONLY attach half of the
panels to the collar in this step.
Go back to the sides and slide the side tabs into the
slots in the last panel and hold in place with three
rivets. Finish lining up the holes in the panels with the
collar and placing rivets to hold in place.
Wear gloves. The edges of the collar are sharp.
!
www.ecomposter.net
5 of 18
