www.ecomposter.net
Assemble Optional Base (Continued)
Step 2:
Fit bottom of two legs into a B3 foot, working around until all six legs are firmly set into the feet. The
base will form a hexagonal shape.
B
Measure the distance between the legs. Adjust the legs slightly until the distances are equal. Tighten
the screws on the leg connectors so the connectors sit firmly in place.
C
Attach the wheels to the top of each leg. The B5 wheel sits on top of the leg and the B4 wheel bracket
sits under the leg. Line up the holes in both pieces and secure with four B6 bolts and four B7 nuts. Use
a Phillips screwdriver to firmly tighten so the brackets stay in place. Repeat to install all six wheels.
The
Eco
mposter sphere rests on top of the base.
D
Tighten bolts so the wheels are firmly attached. DO NOT OVER TIGHTEN.
Over tightening can damage bolts, greatly reducing holding power.
!
15 of 18
2
1
