12
OPERATING INSTRUCTIONS
The appliance is fitted with a flame failure safety device on each burner,
which is designed to stop the flow of gas to the burner in the event of the
flame going out.
Black Circle:
Gas off
Large Flame:
Maximum setting
Small Flame:
Minimum setting
• To light a burner, press in the relevant control knob and turn in an
anticlockwise direction to the maximum setting.
• Keep the Control Knob depressed, the automatic ignition for the burner
will, automatically ignite the flame.
• 50 mm clearance around the appliance and between the hob surface and
any combustible materials.
• You must have a gap of at least 25mm and at most 74mm between
the underneath of the appliance and any surface that is below it.
- An oven must have forced ventilation to install a hob above it.
- Check the dimensions of the oven in the installation manual.
- The cut out size must obey the indication.