1.
When you turn on the device, it is automatically in manual mode.
2.
Press one of the six
[CHASE]
buttons to select the desired chase. If you press the button
again, you disable this function.
3.
Use the
[FADE TIME]
control to set the fading time of the current scene.
4.
With
[BANK UP/DOWN]
you can call the steps of the chase one by one.
1.
Press
[AUTO/DEL]
to enable the Auto mode. The LED
[AUTO]
then indicates that the
mode is active.
2.
Press one of the six
[CHASE]
buttons to select the desired chase. If you press the button
again, you disable this function.
3.
Use the
[WAIT TIME]
control (or the button
[TAP SYNC]
) and the
[FADE TIME]
control to
adjust the chase as desired.
You can select several chases at a time. The chases run in the sequence in which you
select them.
Manual mode
Auto mode
Operating
DMX controller
58
Summary of Contents for DMX-Master I
