STARVILLE DMX-Master I, User Manual

Page: 56 / 68

With this function, you can run a bank of scenes in an endless loop.
1.
Press [AUTO/DEL] to enable the Auto mode. The LED [AUTO] lights up and indicates the
activation.
2.
Use [BANK UP/DOWN] to select a bank with scenes for the run.
3. After selecting the bank whose scenes are intended to run you can use the controls
[WAIT TIME] (or the button [TAP SYNC/DISPLAY] ) and [FADE TIME] to adjust the scenes as
desired.
Repeatedly press [TAP SYNC] to set the speed. The interval of the last two
respective keystrokes defines the speed with a maximum of 5 minutes. When
using this function, all settings made with the [WAIT TIME] fader are being
ignored, as long as you don't move it.
4. Press [AUTO/DEL] again to exit the mode.
Auto mode
Operating
DMX controller
56