STARVILLE DMX-Master I, User Manual

Page: 51 / 68

1.
Switch off the device.
2.
Simultaneously press [AUTO/DEL] and [MODE] and keep these buttons pressed.
3. Keep the buttons pressed and turn the device on again. All LEDs will flash briefly to con‐
firm the deleting. All assigned or reversed channels are reset.
1. Simultaneously press [MODE] and [FINE] , the LED [ASSIGN] is lit.
2.
If you press both buttons again the LED [ASSIGN] goes out and the LED [REVERSE] lights
up.
3.
By pressing the [SCANNERS] buttons you can let the display indicate the Pan and Tilt
channels of the respective scanner.
Resetting all DMX channels
Indicating DMX channels
Operating
DMX-Master I, DMX-Master MK II ENC
51