STARVILLE DMX-Master I, User Manual

Page: 53 / 68

1.
Keep [BLACKOUT / STAND ALONE] pressed for three seconds to enable the Stand Alone
mode
2.
Keep the [SCANNERS] button 1 pressed and press additionally
[BLACKOUT / STAND ALONE] . The Pan and Tilt movements of all devices now stop at the
centre position. The bezel and LED of the first device opens up / flashes and thus indi‐
cate that the device is active and ready to be assigned with a new position (= number in
the chain).
3. With [BANK UP/DOWN] you select the next or last device.
4. With the [SCANNERS] buttons 1 - 12 you set the DMX address.
5.
Keep [PAGE] pressed, then press [SCANNERS] 1 - 12 to increase the address by eight.
6.
Press [BLACKOUT / STAND ALONE] again to return to the Programme mode.
Auto addressing
Operating
DMX-Master I, DMX-Master MK II ENC
53