STARVILLE DMX-Master I, User Manual

Page: 47 / 68

8.5 Assigning / reversing DMX channels.
1.
Enabling programming mode.
2.
Press [FINE] and [MODE] simultaneously. Then the LED [ASSIGN] lights up and indicates
that the ASSIGN mode is active.
3.
With [BANK UP/DOWN] you can switch between Pan and Tilt. The corresponding LED
indicates your selection.
4. Press [TAP/DISPLAY] to switch between 8-channel and 16-channel mode. The display
shows either ‘ASSXX XX | X/Y 08CH’ or ‘ASSXX XX | X/Y 16CH’ .
5.
Select the desired scanner.
6.
If necessary, you can use [PAGE SELECT] to switch between levels Page A and Page B.
7. While keeping [MODE] pressed, press [SCENES] . All LEDs should flash briefly and thus
indicating that the DMX channel has been assigned. The button [SCENES] 1 stands for
DMX channel 1, [SCENES] 2 for DMX channel 2 and so on.
8. Repeat steps 3 - 7.
8-channel mode: You can assign the PAN / TILT movement for 24 scanners. In 8-channel
mode, you can save PAN / TILT for page A and page B.
Assigning DMX channel
Operating
DMX-Master I, DMX-Master MK II ENC
47