18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
29.
Angle the bottom corner of the
Front Door
towards the
Door Hinge Pin
.
30.
Insert the
Door Hinge Pin
into the bottom
Hinge Pin Hole
on the
Front Door
.
31.
In the top corner on the
Front Door
, pull the
Spring-
Loaded
Hinge Pin
down.
32.
While holding down the
Spring-Loaded Hinge Pin
, angle
the top corner of the
Front Door
towards the top corner of
the
Server Rack
, aligning the
Spring-Loaded
Hinge Pin
with the
Hinge Pin Hole
.
33.
Release the
Spring-Loaded Hinge Pin
into the
Hinge Pin
Hole
.
34.
Repeat steps 16 - 18 to install the
Rear Door
.
Leveling the Server Rack
The
Server Rack
will need to be properly level prior to installing
any rack equipment, to ensure stability. The surface the
Server
Rack
is located on must also be a flat, level surface in order
to support the combined weight of the
Server Rack
and rack
equipment installed.
1.
Determine the location of the
Server Rack
. Use a
Spirt/
Bubble Level
to ensure that the location’s surface is a flat,
level surface.
