19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2.
Using an
14 mm Open-Ended Wrench
, lower the
Leveling
Feet
(4 located next to each
Casters
) by turning it clockwise
until the base of the
Leveling Feet
are tightly pressed
against the surface, supporting the weight of the
Server
Rack
.
Grounding the Enclosure
Note:
This product must be grounded. Do not use this prod-
uct without an earth ground connection.
1.
Use an
M6 Screw
to attach a grounding wire to the
grounding point on the
Server Rack,
located on the inside
of the bottom of the
Front
and
Back Doors
and inside the
Side Panels
.
2.
Route the wire under the frame of the enclosure and
connect the wire to your facility’s earth ground connection.
Installing Equipment
Note:
When you load equipment into this product, load
the heaviest equipment in the bottom rails first. Continue
loading equipment in a descending order of weight, so that
the lighter equipment is installed in the upper sections of the
enclosure and the heavier items are on the bottom.
This
Server Rack
comes with
M6 Cage Nuts
and
Screws
but
the equipment you’re installing may come with mounting
hardware. Consult the documentation that came with the
equipment to determine the best mounting hardware that you
should use and how you should install it.
