17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
20.
Align the
Screw Holes
on the
Bottom Plate w/ Cable
Management Slot
with the
Screw Holes
on the interior of
the
Side Panel
, located on the front and back on the
Side
Panel
.
21.
Insert two
M6 x 12 mm Phillips Screws
through the
Screw
Holes
on the
Bottom Plate w/ Cable Management Slot
and into the
Screw Holes
on the interior of the
Side Panel
.
22.
Using a
Phillips Head Screwdriver
, tighten the
M6 x 12 mm
Phillips Screws
, being careful not to over-tighten.
23.
Repeat steps 8 - 10 to install the
Back
and
Middle Bottom
Plates
.
Note:
Install the
Back Bottom Plate
before you install the
Middle Bottom Plate
.
24.
On the top of the
Server Rack
, align the
Screw Holes
in the
four corners on the
Top Panel
with the
Screw Holes
in the
four corners on the top of the
Server Rack Frame.
Note:
The
Top Panel
should fit tightly against the corner
piece of the Top of the
Server Rack
.
25.
Insert an
M6 x 12 mm Hex Screw
through the
Screw Hole
on the
Top Panel
and into the
Screw Hole
on the
Server
Rack Frame
.
26.
Using the
M6 Hex Key
, tighten the
M6 x 12 mm Hex Screw
,
Being careful not to over-tighten.
27.
Repeat steps 13 - 14 for the remaining corners.
28.
Insert a
Door Hinge Pin
into the
Hinge Pin Hole
in the
bottom corner of the
Side Panel
.
