15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Assembling the Server Rack
1.
Align the
Screw Holes
on the corners of the
Side Panel
with
the
Screw Holes
on the ends of the
Center Beam
. Ensure
that the
Lip
on the
Center Beams
lines up with the
Lip
on
the inner side of the
Side Panel
.
2.
Slide an
M8 Spring Washer
over the
M8 x 20 mm Hex
Screw
.
3.
Insert the
M8 x 20 mm Hex Screws
through the
Screw Hole
on the
Side Panel
and into the
Screw Holes
on the
Center
Beam
.
4.
Using the
M8 Hex Key
tighten the
M8 x 20 mm Hex Screws
,
being careful not to over-tighten.
5.
Repeat steps 1 - 4 to install the other
Side Panel
and the
remaining
Center Beams
.
6.
Turn the
Server Rack
upside down, resting the
Server Rack
on it’s top.
7.
Align the
Mounting Holes
on the
Casters
with the
Mounting Holes
in the corner of the
Server Rack Frame
.
8.
Insert an
M6 x 10 mm Screw
through the
Mounting Hole
on the
Caster
and into the
Mounting Hole
on the
Server
Rack Frame
.
9.
Using a
Phillips Head Screwdriver
, tighten the
M6 x 10 mm
Screw
, being careful not to over-tighten.
10.
Repeat steps 1 - 4 to install the other
Caster
and
Casters
with Brakes
.
