background image

2

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Warning Statements

•  Make sure that you assemble this product according to the instructions.

•  Do not exceed the weight capacity of this product. Overloading this 

product might result in injury or property damage. This product can 

support the following weight: Stationary = 1763.7 lb. (800 kg) Rolling = 

330 lb. (150 kg).

•  This product is intended for indoor use only and should not be used 

outdoors.

•  This enclosure is extremely heavy. Never attempt to move or lift this 

enclosure without assistance.

•  Tipping hazard! Extending multiple components from this enclosure 

increases the chance that the enclosure will tip over. To avoid this risk, 

do not extend more than one component from the enclosure.

•  Do not place any items on this enclosure and do not stack the enclosure 

on top of another enclosure.

•  Keep liquid away from this enclosure.

•  Make sure that you install the enclosure in an area that can handle the 

combined weight of the enclosure and the equipment that you intend 

to place inside of the enclosure.

•  This product requires an earth ground connection. Do not use this 

product without an earth ground connection.

Varningar

•  Se till att du monterar produkten i enlighet med instruktionerna.

•  Överskrid inte produktens vikt kapacitet. Överbelastning av denna 

produkt kan leda till skador eller skador på egendom. Denna produkt 

kan stödja följande vikt: stationär: 800 kg rullande: 150 kg.

•  Produkten är endast avsedd för användning inomhus och ska inte 

användas utomhus.

•  Detta skåp är extremt tungt. Försök aldrig flytta på skåpet eller lyfta det 

utan hjälp.

•  Risk för vältning! Att förlänga flera komponenter från detta skåp ökar 

risken för att det välter. Förläng inte fler än en komponent från skåpet 

för att undvika risk.

•  Placera inte saker ovanpå skåpet och ställ inte skåpet ovanpå ett annat 

skåp.

•  Håll vätskor borta från skåpet.

•  Se till att du installerar skåpet på en plats som kan hantera den 

kombinerade vikten av skåpet och utrustningen som du tänker placera 

inuti.

Summary of Contents for RK1836BKF

























Reviews: