63
You can prohibit people without the authority from accessing the Self-Guard by
creating a password for each function (BOOTING, OPTION, SEARCH, and RECORD).
You can turn each function on and off in “CHANGE PWD”.
Functions
When each function is set with a password
BOOTING
Put in the password for the Self-Guard to operate when you turn it on.
OPTION
Put in the password to change various settings or options.
SEARCH
Put in the password to search the data.
RECORD
Put in the password to start recording.
BLUETOOTH Put in the password to access other Self-Guards via BLUETOOTH
The initial default password is “0000”. To change the password, first, put in the
password that you have been using so far, and then put in the new password.
The password reads as “****” as you put in the password. Using [ ] and [ ]
△
▽
, choose a
number for your password, then the number reads as ‘*’, and the cursor moves to the
next position as you press [
▷
]. After you complete putting in all the numbers press
[ENT], and repeat the same process until you complete putting in all the numbers for
the password. Once you put in the correct value that matches with the old password,
you will be asked to put in the new password. Repeat the same process as above, and
enter the same password again to confirm the new password. You must press [ENT] to
Summary of Contents for Self-Guard SG-100
Page 24: ...24 GETTING READY Self Guard...
Page 83: ...83...
Page 85: ...85...
