55
address that the Self-Guard is using, the GATEWAY address of the “Wireless-G Access
Point”, the name of the “Wireless –G Access Point - SSID, and GLOBAL IP address of
the of the “Wireless-G Access Point”. The GLOBAL IP address of the “Wireless-G
Access Point” is used to connect to Self-Guard units from a remote place with the
provided remote software. If the wireless LAN does not operate normally, then this
GLOBAL IP will be indicated as 000.000.000.000.
4-5-1-3. IP/GW SET
This function is to set the address for IP, GATEWAY, and SUBNET MASK of the Self-
Guard. Use [
△
] and [
▽
] to change the value and [
◁
] and [
▷
] to move the cursor, and
then press [ENT] to save the changes. If you need to change the IP, GATEWAY,
SUBNET MASK of the Self-Guard, you should make changes for the Wireless-G
Access Point to change the settings. Refer to the User’s Guide (Wireless-G Access
Point) for detailed instruction.
Wireless-G Access Point uses DMZ to send the external data from Internet to the Self-
Guard, and the DMZ value is set as the Self-Guard’s default IP address
(
192.168.10.130).
When you change the IP address for the Self-Guard, you need to
change the IP address of DMZ settings of the Wireless-G Access Point. Refer to the
User’s Guide (Wireless-G Access Point) for detailed instructions on how to change this
value.
Summary of Contents for Self-Guard SG-100
Page 24: ...24 GETTING READY Self Guard...
Page 83: ...83...
Page 85: ...85...
