Starnex Self-Guard SG-100, Manual

Page: 23 / 97

23
Steps to set the Self-Guard as a SLAVE:
1. For the fastest transmission of the data, set the recording resolution to 128x128.
2. Set “6. BLUETOOTH” -> “2. M/S:
SLAVE ”
3. Check “3. MY ID” and write down the ID.
4. Select “1. RECORD” or “5. TRANSMIT.
Steps to set the Self-Guard as a MASTER:
1. Set “6. BLUETOOTH” -> “2. M/S:
MASTER ”
2. Select “1. CONNECT SET”
3. Select “1. BT1/CH#1/OFF”
4. “1.CONNECT:
ON ”
5. “4.00:02:78:0C:60:FF” ->change this ID to the SLAVE’s, which you have written
down for your record in step #3 in the "SLAVE"
6. Select “1. RECORD” or “5. TRANSMIT.
Please refer to the General Guide for more details about BLUETOOTH.