Starcraft Telluride 2021, Owner'S Manual, Page: 49 / 169

47
Section 4: Vehicle Operation
1. The App will now display all functions. Choose Leveler.
The following functions can be operated using the OneControl App.
Refer to the Ground Control 3.0 manual for complete instructions.
 Standard Mode and Menu
 Basic Jack operation
 Unhitching Instructions
 Auto Leveling
Linc Remote Control
Configuring the remote to sync with the
OneControl Touch panel:
 Press the chrome button on the bottom of
the remote to turn it on. Enter the PIN (de-
fault is 0,0,0,0). The PIN can be changed
after entering the default PIN. A menu will
appear, choose Leveler from that menu.
 Turn the OneControl Touch Panel ON in-
side the RV.
 At the top of the Touch Panel screen press
the “CONNECTED” icon quickly 6 times.
 A GEAR icon will appear at the top of
the screen that says “OPTIONS”. Press
this GEAR icon.Screen display changes
to “ Select Operation ” with arrows on the
left side of the screen. Use to arrows on
left side of screen. Scroll to “WIRELESS
CONFIG”.
 Press the ENTER button at the bottom of
the screen.
 The screen will display “Wireless Config-
uration Press any Linc button to sync” .
 Press any button on the remote control
while in Leveler mode and the remote will
be connected.
Pressing the ABORT button on the touch screen will cancel the configuration sequence.
The following functions can be operated using the Linc Remote Control. Refer to the Lip-
pert Ground Control 3.0 manual for complete instructions.
 Basic Jack operation
 Unhitching Instructions
 Auto Leveling
NOTE: The PIN is not needed or asked for if
the tablet is attached to the docking station and
connected to the USB cable inside the RV.
Linc Remote
Maintenance Record Table of Contents