9
Copyright © 2020. All rights reserved • 95 North Oak Street • Kendallville, IN 46755
Fuse Box
5
Fill Level
6
Return Line
Filter Outlet
Return Line
Goes to Pool Jets
IL2562
4
4. Connect return line from filter to swimming pool
return inlet.
6. Fill pump and trap with water, replace trap lid
and check system for leaks. If no leaks, proceed
with pump startup.
NOTE:
DO NOT START PUMP if any leaks are
present in the system.
After startup check again for leaks again at
each connection.
5. Make sure power is off and attach wiring.
Always disconnect
pump from electricity
before performing any work on the motor.
Refer to instructions for wiring connections.
INSTALLATION:
