background image

2

Copyright © 2020. All rights reserved • 95 North Oak Street • Kendallville, IN 46755

PACKAGE CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

DESCRIPTION

QUANTITY

A

Pump

1

B

Adapters 

2” Slip Union

2

C

Adapters

1.5” Slip Union

2

D

Couplings

2

Basic safety precautions should always be followed, including the following. Failure to follow 
instructions can cause severe injury and/or death. 

This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for 
one of the following signal words and be alert to the potential for personal injury.

Warns about hazards that could cause serious personal injury, death or major property 
damage and if ignored presents a potential hazard.

Warns about hazards that will or can cause minor or moderate personal injury and/or 
property damage and if ignored presents a potential hazard. It can also make consumers 

aware of actions that are unpredictable and unsafe.

The NOTICE label indicates special instructions that are important but not related to hazards.

READ AND FOLLOW ALL INSTRUCTIONS in this owner’s manual and on the 
equipment. Failure to follow instructions can cause severe injury and/or death.

SUCTION ENTRAPMENT HAZARD.

 Suction inlets and outlets and/or suction outlet 

covers which are damaged, broken, cracked, missing, or unsecured can cause severe 

injury and/or death due to the following entrapment hazards:

• 

Hair Entrapment

- Hair can become entangled in suction outlet cover.

• 

Limb Entrapment-

 A limb inserted into an opening of a suction outlet sump or suction outlet cover that is 

damaged, broken, cracked, missing, or not securely attached can result in a mechanical bind or swelling of 
the limb.

• 

Body Suction Entrapment

- A negative pressure applied to a large portion of the body or limbs can result 

in an entrapment. 

• 

Evisceration/ Disembowelment

 - A negative pressure applied directly to the intestines through an 

unprotected suction outlet sump or suction outlet cover which is, damaged, broken, cracked, missing, or 
unsecured can result in evisceration/ disembowelment.

• 

Mechanical Entrapment

- There is potential for jewelry, swimsuit, hair decorations, finger, toe or knuckle to 

be caught in an opening of a suction outlet cover resulting in mechanical entrapment.

A

B

IL2319

C

D

Summary of Contents for 025191 1.65HP

































Reviews: