- 15 -
Change the Memory switch by following operations.
1. Press and hold POWER for approx. 3 seconds, and printer is turned on.
2. To put the printer into Memory Switch Setting mode, press and hold both the POWER & FEED but-
tons for 3 seconds. After the ERROR LED flashes five (5) times, you can configure the settings. Release
the buttons after you surely confirm the LED flashes five (5) times, to get a printer into the setting
mode.
CAUTION
Before changing the memory switch settings, make sure that the communication with a host
device is disconnected.
When the printer is under the Bluetooth communication with a host device, it cannot enter the
Memory Switch Setting mode.
Bluetooth Mode
Indicates the printer mode or currently setting .
FEED button: Changes the printer mode.
POWER button: Changes the setting.
FEED
POWER
ERROR
Bluetooth Mode
5 times
