Star Micronics MG-S Series, Operation Manual, Page: 57 / 114

MG-S series operation manual 3 Functions related to the operation
－
47
－
3-15 Stabilization wait setting
Set when to indicate the weighed value after the zero-point adjustment or tare;
either after or before the weighed value stabilizes.
For verified balance:
- This setting menu is not available;
- The balance always wait stabilization before indicating weighed value after the zero-point
adjustment or tare.
1
Select the stabilization wait setting.
Push [Menu] key, then push [F1-F4] keys
to go to <17 WT STABLE>.
Push [F4] key to change the setting value.
Push [F1/F2] key to select.
OFF : Invalid
ON : Valid
Push [F4] key to fix.
2
Exit the setting menu.
Push [Menu] key to shift to the measuring
mode.
3-16 Backlight setting
Setting the backlight control.
1
Select the backlight setting.
Push [Menu] key, then push [F1-F4] keys
to go to <1A BACKLIGHT>.
Push [F4] key to change the setting value.
Push [F1/F2] key to select.
Refer to the “Set List”.
Push [F4] key to fix.
Set List
OFF : Invalid 3MIN : 3 minutes 5MIN : 5 minutes
10MIN : 10 minutes 30MIN : 30 minutes ON : Always ON
2
Exit the setting menu.
Push [Menu] key to shift to the measuring
mode.
For accurately weighing, please set <1A BACKLIGHT> to continuously “ON” or
“
OFF”.
When the balance is battery powered, it is recommended to set backlight settings to continuously
“OFF” to save the power.