Star Micronics MG-S Series, Operation Manual, Page: 107 / 114

MG-S series operation manual Appendix
－
97
－
Appendix 6 Balance operation with password control function
This chapter describes how to use the balance with “8-5-2 Password control”. This function is useful for
setting different authority for each user/guest.
Appendix 6-1 User’s authority setting
1
Power on the balance.
“Self-check”
Enable the <642 PASSWORD> and register
the administrator password in <643 SET
ADMIN PASS>, then power-off the balance.
Push [On/Off] key, then the balance shifts
to User login mode after start-up
operation.
2
Go to the Administrator login mode.
Push [F4] key to go to “Administrator login
mode”.
< > is indicated on the 7-segment
display.
3
Select the user to set the authority.
Select the user
0 ： Guest user
1 ： User 1
2 ： User 2
USER ： Shift to the User login mode
4
Input the administrator password.
Input the administrator password by
pushing [F1-F4] keys.
Each digit increments as “0, 1, …, 8, 9, 0” by
pushing each [F] key.
First digit from the left : [F1] key
Second digit from the left : [F2] key
Third digit from the left : [F3] key
Fourth digit from the left : [F4] key
5
Start up the balance.
Push [Zero] key.
When the password is authenticated, the
balance starts up.
6
Register the user password.
Refer to
“8-5-2(2) User password registration”.
(1) The user password of which selected in Step 3 is registered.
(2) When “0: Guest user” is selected at step 3, skip this step.