Star Micronics MG-S Series, Operation Manual, Page: 44 / 114

3 Functions related to the operation MG-S series operation manual
－
34
－
3-6 Statistics mode
The statistical operation function collects weight data and indicates maximum, average, and other
statistical values.
This mode is not available for verified balance.
(1) Only “mg” or “g” can be used.
(2) Each calculation result except “CV” follows the smallest readability among which are used to
record the weighing data.
(3) Up to 999 weight data can be saved.
The output timing is fixed to “Once at stable/immediately after [Output] key is pushed” regardless
of the setting value of <413/423 CONDITION> of “6 External input/output function”.
The setting of <17 WT STABLE> The output condition
ON Once at stable after [Output] key is pushed
OFF Once immediately after [Output] key is pushed
1
Select the statistics mode.
Push [Menu] key, then push [F1-F4] keys to
go to <11 MODE>.
Push [F4] key to change the setting value.
Push [F4] key to select.
STAT : Statistics mode
Push [F4] key to fix.
2
Exit the setting menu.
Push [Menu] key to shift to the statistics
mode.
3
Choose whether or not clear all the
data. Push [F3/F4] key to select whether or not
clear all the data.
When there is no data stored, this step is skipped.
YES ： Clear
NO ： Not clear
When <NO> is selected, weighing step of the next
statistics data starts.
4
Store weighing data.
Place the sample in the weighing pan.
Push [Output] key to store the sample weight.
Weighing data is collected and then output.