Star-Light DPJ-800W, Instruction Manual

Page: 3 / 28

3
Speed Program Processed Food Rotation Speed
(rpm)
1 SOFT FRUIT Grape, peach, melon, blueberries,
raspberries, water melon
7000
2 CITRUS Orange, grapefruit, tangerine 8800
3 PINEAPPLE Pineapple, netted melon, peach, mango,
soft pear, cucumber, apricot, kiwi.
10200
4 APPLE Apple, ginger, hard pear 12000
5 HARDVEG Carrot, pumpkin 12500
When the required settings are selected, press the „ON/OFF” button. The settings shown on the
display will stop blinking, and the juice extractor will start operation.
Press the „ON/OFF” button once again to stop the operation.
Feed the pre-prepared fruits and vegetables into the juice extractor and press down gently with the
pusher. NEVER USE FINGERS AS PUSHER.
To set maximum speed quickly during operation, press and hold down the „Pulse” button. To set
the initial speed, release the „Pulse” button.
The motor must always be running after fruit or vegetables were fed into the appliance.
When pulp container or juice jug is full, switch off the power and empty containers before continuing
the process.
5. CLEANING
Remove and wash all removable parts in warm soapy water. Rinse filter assembly from under side
for easy removal of residue from strainer holes. Do not use a dishwasher or very hot water.
Do not use steel woods, abrasive cleaners or scouring pad on appliance.
To clean the outside of the motor unit, use a damp sponge.
Never immerse the body in water.
Some vegetables, such as carrots, may cause discoloration of the plastic. Reduce this by washing
parts immediately after use with small amount of non-abrasive cleaner on a cloth, rub gently, then rinse
well and dry.
The grating filter must be replaced as soon as any signs of damage or wear and tear appear.
6.STORAGE
Store assembled cleaned and dried juice extractor in a dry place.