-4-
Mounting
DL35-6 and DL35-12 Mounting
1. The DL35-6 and DL35-12 are designed to mount in the front windshield
of your vehicle with the enclosed suction cups.
2. Attach the brackets and cups as indicated on pages 2-3, leaving the hex
bolts just loose enough for the bracket to hinge back and forth for
adjusting.
3. Select a location for the light to be mounted. Take into consideration
viewing angles, window tinting, and where the cig plug wire will run
when selecting a location.
4. Mount the light to the window, in your desired position. Carefully route
the cable, plug the light in, and activate it.
Be sure that the light
and/or cord will not interfere with the vision of the driver or the
operation of the steering wheel, gear shifter, and/or any airbags.
5. Make the final adjustments by having someone stand 20 feet in front of
the vehicle with the light running, and checking the light through the
front window. Tilt the light up or down as necessary and snug it as
close to the window as possible to help reduce flashback. Tighten the
hex head bolts once you have achieved the desired position.
CAUTION:
Take extreme caution not to over tighten the screws!!!
Over tightening of the screws can strip the holes and result in a
faulty mount.
6. Skip to the Operation section.
It is the sole responsibility of the owner to ensure the warning light is
secure. Check your light every time you enter the vehicle to ensure that
it is mounted securely. Star Headlight and Lantern Co. assumes no
responsibility for the secure mounting of this light.
The DL35 series dash lights are designed to be mounted on the inside of
your vehicle. They are not intended for exterior applications.
Summary of Contents for M-Tech DL35-12
Page 1: ...PLITSTR369 REV C 9 25 06 LED DASH DECK LIGHTS TM ...
Page 20: ... 17 ...
