-10-
(OPERATION CONT’D)
DL35-6-1 and DL35-12-1 Patterns
(hard wire only)
PHASE
TYPE
PHASE
Flash
Pattern #
Pattern
TYPE
Pattern Description
1
A
Warn (SAE and Title 13 compliant)
2
B
Flicker flash
3
C
Post pop
4
D
Psu-flicker
1S
5
E
Random
6
A
Warn (SAE and Title 13 compliant)
7
B
Flicker flash
8
C
Post pop
9
D
Psu-flicker
Simultaneous
Flashing of Halves
Within Each Light
2S
10
E
Random
11
A
Warn
(SAE and Title 13 compliant for –12 versions only)
12
B
Flicker flash
13
C
Post pop
14
D
Psu-flicker
1A
15
E
Random
16
A
Warn
(SAE and Title 13 compliant for –12 versions only)
17
B
Flicker flash
18
C
Post pop
19
D
Psu-flicker
Alternating Flashing
of Halves Within
Each Light
2A
20
E
Random
21
Steady
NOT
SYNCHRONIZED
22
Bonus
Please Note:
If you have two different colors on each of your heads, only use
Patterns 11, 12, 13, 16, 17, or 18.
Pattern Button Operation
•
Pressing the pattern button until the lights stop blinking (approximately 1 second), and
releasing it advances the light to the next pattern.
•
Holding down the pattern button until the unit BLINKS 1 time (approx. 3 sec.) jumps to
pattern #1.
•
Holding down the pattern button until the unit BLINKS 2 times (approx. 6 sec.) jumps to
pattern #11.
•
Holding down the pattern button until the unit BLINKS 3 times (approx. 9 sec.) jumps to
pattern #21.
•
Holding down the pattern button until the unit BLINKS 4 times (approx. 12 sec.) toggles
the flasher in and out of Feedback Mode*.
* =
While in Feedback Mode, the light will blink the number of the pattern it is changed
to (i.e. If you are in pattern 13 and press the pattern change button, the light will
blink 14 times, then go into pattern 14). The light is shipped with the Feedback
Mode off.
Summary of Contents for M-Tech DL35-12
Page 1: ...PLITSTR369 REV C 9 25 06 LED DASH DECK LIGHTS TM ...
Page 20: ... 17 ...
