Star Headlight & Lantern Lineum Star Phantom ULB48-TD Instructions Manual Download

Page: 4 / 16

-3-

5. Determine an appropriate user-supplied screw to penetrate the

headliner and securely mount the bracket to the roof brace (or other
mounting location) through the mounting hole in each forked bracket.

CAUTION: Take care to ensure when selecting a screw and drilling the hole that it
is capable of supporting the weight of the light and that it does not penetrate the
roof of the vehicle.

Forked Bracket Installation (CONT'D)

4. Repeat steps 1-3 for the opposite attaching bracket

CAUTION: Take extreme caution not to over tighten the screws!!! Over tightening

of the screws can strip the holes.

Tighten the nuts securing

the mounting brackets

Press light tightly

against window

Mounting

Hole

6. Using the slots in the brackets, adjust the

light so that it fits tightly against the window,
carefully bending the forked brackets, if
necessary, and tighten the screws.

Summary of Contents for Lineum Star Phantom ULB48-TD

















Search results

Summary of Contents for Lineum Star Phantom ULB48-TD

Reviews:

Related manuals for Lineum Star Phantom ULB48-TD

Brands by name

Popular brands

Star Headlight & Lantern Lineum Star Phantom ULB48-TD, Instructions Manual

Search results

Summary of Contents for Lineum Star Phantom ULB48-TD

Reviews:

Related manuals for Lineum Star Phantom ULB48-TD

Brands by name

Popular brands