12
– Drain the tank
– Start the motor and keep it running until it
stops of its own accord.
– Let the appliance cool down completely.
– Remove the spark plug.
– 1 teaspoon of two-stroke motor oil should be
fed into the combustion chamber.
– Slowly pull the starter cord several times to coat
the internal components with the oil.
– Re-insert the spark plug.
Store the appliance in a dry place and far away
from any ignition sources such as furnaces, gas
heaters, etc.
Store the machine where it is dry.
Transport
– Slip the protection cover over the cutting
equipment.
– Let the appliance cool down completely.
– Drain the tank
– Secure the appliance against slipping.
– If shipping, use the original packaging wherever
possible.
10. Disposal
Attention !
Risk of fire or environmental damage!
Avoid damage caused by leaking fuel:
drain the tank prior to disposal.
This appliance must not be disposed of with
regular household waste! Dispose of the
appliance in the appropriate manner. For more
information, consult your community waste
disposal service.
Disposing of the packaging
The packaging consists of cardboard and
correspondingly marked sheets that can be
recycled.
– Make these materials available for recycling.
11. Technical data
Cubic capacity: 26 cm³
Rated power: 0,75 kW
Tank capacity: 0,46 l
Maximum motor speed: 10000 min
-1
Cutting length: 550 mm
Acoustic pressure (L
PA
)*: 95,8 dB(A) K=3dB(A)
Acoustic power (L
WA
)* : 106,9 dB(A) K=3dB(A)
Vibration: 4,956 m/s² K=1,5m/s
2
Weight: 5,3 kg
Spark plug: L8RTC (TORCH)
RCJ6Y (CHAMPION)
*) The values given are emission values, and therefore do not
necessarily represent safe workplace values. Although there
is a correlation between emission and immission levels, it
cannot reliably be derived from this whether additional
protective measures are required or not. Factors influencing
the immission level actually present at the workplace include
the characteristics of the working area, other sources
of noise, e. g. the number of machines and other working
processes in the vicinity. The permitted workplace values can
also vary from country to country. This information should
however enable the user to make a better estimate of the
hazards and risks.
Approved fuels
Attention !
Risk of damage to the appliance!
Use only the specified fuel.
Never use oil intended for car or
outboard engines.
Note:
When used in a mixture, fuel will age
particularly quickly: therefore, do.
not mix more fuel than you will
consume within a month.
. Normal petrol, 91 octane If no regular petrol is
available, you can also use petrol with a higher
octane ratio.
. Two-stroke motor oil for air-cooled motors, high
quality
G
B
