Stanley RD60, Operator'S Manual

Page: 9 / 40

⊲ Wear protective equipment specified by the tool manufacturer.
⊲ Do not perform any work on the tool unless you are authorized and qualified to do so.
Always read the operator service manuals before any repair is made. After completing
maintenance or repair, check for correct functioning of the tool. If not functioning
properly, shut down the machine, follow proper Lock-Out / Tag-Out procedures and tag
“DO NOT OPERATE” until all problems are corrected.
DO NOT MISUSE OR MODIFY EQUIPMENT
⊲ Use and maintain the tool as stated in this manual. Misuse of the tool can cause serious
injury.
⊲ Do not modify the tool in any way. Modifications may weaken it’s integrity and may
impair it’s function, safety, life and performance. When making repairs use only factory
recommended replacement parts, following authorized instructions. Use of parts that
are not factory approved may be substandard in fit and quality, and may cause damage
and void the warranty.
END OF LIFE DISPOSAL
⊲ At the completion of the useful life of the unit, drain all fluids and dismantle by separating
the different materials (rubber, steel, plastic, etc.). Follow all federal, state and local
regulations for recycling and disposal of the fluid and components.
62211 | February 2022 | 9