Stanley RD60, Operator'S Manual

Page: 32 / 40

Tool Disposal
Tool Body
Disassemble the tool and dispose of all non-metal parts. Take care to properly collect all fluids. Recycle
the metal components. Contact your local municipal recycling authorities for recycling instructions.
Gear Oil
Drain the gear oil and collect it for recycling. Do not throw away or pour down the drain. Contact your
local municipal recycling authorities for recycling instructions.
Cutting Fluid
Dispose of contents/container according to local, state, and federal regulations. Empty containers must
be completely empty with all closures in place, as per 49CFR173.29 & EPA 40CFR261.7. Do not reuse
containers for waste and disposal.
Batteries
The RBRC® (Rechargeable Battery Recycling Corporation) seal on the nickel cadmium,
nickel metal hydride or lithium-ion batteries (or battery packs) indicates that the costs to
recycle these batteries (or battery packs) at the end of their useful life have already been
paid by D
E
WALT. In some areas, it is illegal to place spent nickel cadmium, nickel metal
hydride or lithium-ion batteries in the trash or municipal solid waste stream and the Call 2 Recycle®
program provides an environmentally conscious alternative.
Call 2 Recycle, inc., in cooperation with D
E
WALT and other battery users, has established the program
in the United States and Canada to facilitate the collection of spent nickel cadmium, nickel metal
hydride or lithium-ion batteries to an authorized D
E
WALT service center or to your local retailer for
recycling. You may also contact your local recycling center for information on where to drop off the
spent battery. RBRC® is a registered trademark of Call 2 Recycle, Inc. RBRC™ is a registered trademark
of the Rechargeable Battery Recycling Corporation.
32