Stanley RD60, Operator'S Manual

Page: 29 / 40

your tool.
⊲ Ensure the battery is removed, the bit is stowed in the bit storage container and the drill is fully
retracted before transport.
⊲ Always use the lifting handle when moving the tool.
⊲ Lift only as high as necessary to load. NEVER lift or transport over people.
⊲ Secure the tool to the transport vehicle in the horizontal position. Ensure tool is secured using
the carrying handle and frame as tie down points. Ensure the tool will not move during transport.
An unsecured tool could cause personal injury or damage to the tool.
Shipping the D
E
WALT FLEXVOLT™ Battery
The D
E
WALT FLEXVOLT™ battery has two modes: Use and Shipping.
Use Mode: When the FLEXVOLT™ battery stands alone or is in a D
E
WALT 20V max product, it will
operate as a 20V Max battery. When the FLEXVOLT™ battery is in a 60V Max or a 120V Max (two 60V
Max batteries) product, it will operate as a 60V Max battery.
Shipping Mode: When the cap is attached to the FLEXVOLT™ battery, the battery is in Shipping Mode.
Strings of cells are electrically disconnected within the pack resulting in three
batteries with a lower Watt hour (Wh) rating as compared to one battery with a
higher Watt hour rating. This increased quantity of three batteries with the lower
Watt hour rating can exempt the pack from certain shipping regulations that are
imposed upon the higher Watt hour batteries.
The battery label indicates two Watt Hour Ratings (see example). Depending on how the battery is
shipped, the appropriate Wh rating must be used to determine the applicable shipping requirements.
If utilizing the shipping cap, the pack will be considered 3 batteries at the Wh indicated for “Shipping”.
If shipping without the cap or in a tool, the pack will be considered one battery at the Watt hour rating
indicated next to “Use”
Transport Wh rating indicated 3 x 40 wh, meaning 3 batteries of 40 Watt hours each. The Use Wh
rating indicates 120 Watt hour (1 battery implied).
62211 | February 2022 | 29