Stanley RD60, Operator'S Manual

Page: 17 / 40

# 88425 - READ MANUAL / OPERATION
DECAL
# 88128 - READ MANUAL / USE PROPER
BATTERY / WEAR PPE
WARNING!
Infrastructure
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
Tool Speed: 250-275 RPM
Battery: 60V MAX
USE ONLY WITH DEWALT BATTERIES. ALWAYS USE PROPER
EYE AND RESPIRATORY PROTECTION.
NOTE
Contact your local dealer for logo decals.
62211 | February 2022 | 17
Decals
Decal Placement
Decals
Operation Decal Explanation
Tool Operation
Tap the cycle start button (green) to wake
up the tool. The button light will turn on.
Tool Stop Procedure
1
To immediately stop the tool, press the
cycle stop button (red).
1
Then press the cycle start button (green)
to retract the tool to it’s home position.
2
Press cycle start button (green) again to
start the drilling cycle.
2
Press cycle start button (green)
to start a new drilling cycle.
3
To power down RD60, hold the cycle
stop button for 4 seconds. The button
light will flash, then turn off.
3
1
2
3
1
2
3