T15e Tag Deployment & User Guide
62
Updating Tag Firmware
Tags that are setup to associate with MobileView can have their Firmware
updated via a Bidirectional session by doing the following:
From Tags tab in MobileView, click on the Tag Configuration icon
.
1.
From the Repository tab, upload the new Firmware and then click Save.
2.
Select the Firmware Selection tab.
3.
Select the required firmware for the T15e Tag.
4.
Click Save.
5.
Tag firmware will be updated during the next BD session. You can initiate
6.
an immediate sync by following the steps in the
Swapping or Removing Inactive Tags in
MobileView
When swapping or removing inactive tags in MobileView, data may be lost.
Additionally, the tag’s Local Alarm will be deactivated and the tag’s configured
threshold vales will be deleted. It is therefore recommended to perform a
manual sync from the tag before swapping or removing. See