T15e Tag Deployment & User Guide
46
Event Conditions
Configure the Event Conditions according to the following:
Set event condition in absolute terms: If you want to set a specific (not
inherited from the asset / category level) temperature range that triggers an
alert, enter it here.
Set event conditions relative to the assets’ predefined limits: Select this
option to use thresholds defined on the asset / category level.
Set trigger time:
Only Trigger after: Define the time period that a tag’s value must be out of
a configured range before an Alert is sent. For example; if the time
threshold is set to 15 min and the tag’s value is out of its configured range,
an alert will be triggered if its value does not normalize within the set time
of 15 min.
Asset default time: Select this option to use the value defined on the
Asset / Category level.
Alert when no temperature reports have been received for: NOTE: This
option must not be used as it will be removed in a future version. It is
recommended to create a Sensor Tag Error Event instead. See
Best Practice Note: It is recommended to inherit the configuration from the
Asset / Category. Only set local conditions when required.
Actions
Set the actions accordingly.
When using the Email Action Type, select the Message Template as
Measurements Message. This email template contains details about the
contact sensor value.
Additionally when using INF, you can choose to display the Sensor Type and
Value in the Selected Alert Fields.