T15e Tag Deployment & User Guide
17
Enabling Secured Tag Communication with MobileView
Note:
This section is for sites that are using MobileView in a secured mode
and require secure BD (Bidirectional) tag sessions. For more information on
using MobileView in a secured mode, refer the latest MobileView Deployment
Guide.
Skip this section if the site is not using MobileView in a secured Mode or if you
will be deploying the tag in a UD (Unidirectional) environment. See
T15e Tags support a HTTPs connection with MobileView Servers using the
TLS1.2 protocol. This allows a MobileView Server authentication using pre-
installed X.509 certificates.
The STANLEY T15e Tag Certificate
To allow a MobileView Server authentication using the Server’s SSL certificate,
the T15e Tag must be pre-loaded with a Root CA certificate that authenticates
the MobileView Server’s SSL certificate. This can be done either directly, or
through an Intermediate Certificate using a Chain of Trust (see
Certificate
Definitions
).
The T15e Tag must be pre-loaded with only a Root CA certificate. Any other
certificate that is pre-loaded to the tag will fail the Server’s SSL certificate
verification.
Certificate Format
T15e Tags can be pre-loaded with a Root CA certificate in X.509v3 PEM format
(also known as Base64 encoded certificates that starts with “-----BEGIN
CERTIFICATE-----” and ends with “-----END CERTIFICATE-----”).