2.5 Command List
2 – 23
Interface Configuration
IFCF(?)
i
{
,j
}
Set (query) interface configuration parameter
i
{
to
j
}
. The parameter
i
may be one of the following:
i
Configuration parameter
0
RS-232 Baud Rate disable
/
enable
1
RS-232 Baud Rate: 9600 or 57600
2
GPIB disable
/
enable
3
GPIB address
4
Disable
/
Enable TCPIP interface
5
Disable
/
Enable Raw Socket access on port
5025
6
Disable
/
Enable Telnet access on port 5024
7
Disable
/
Enable VXI-11 access
8
Set
/
Query Static IP Address
9
Set
/
Query Subnet Address
/
Network Mask
10
Set
/
Query Default Gateway
Set
j
to 0 to disable a setting and 1 to enable it. Parameters 8–10
require an IP address in the form ‘a.b.c.d’ where each letter is a
decimal integer in the range 0–255. Parameters 47 indicate the active
IP configuration.
IFCF 6,0
CR
Example:
Disable Telnet Access
IFCF 8,192.168.10.5
CR
Example:
Set IP address to
192.168.10.5
IFCF?10
CR
Example:
192.168.10.1
The returned value indicates the active default gateway.
Interface Reset
IFRS
i
Reset one of the communications interfaces. The parameter
i
identi-
fies the interface to reset:
i
Configuration parameter
0
RS-232
1
GPIB
2
TCP
/
IP
When an interface is reset, it is changed to its power-on state.
SR470 Shutter Controller