Standard Horizon PC-P430, Manual

Page: 9 / 36

IX
Non-Operation Check When One
Cutting Button is Pressed
Check that the knife does not operate if either
Cutting button is pressed.
1
Check that the Power switch and the key
switch are both turned on.
2
Check that the safety cover and door are closed.
3
Check that LED on the monitor lights.
4
Press and hold the Left Cutting button. Check
that the machine will not run.
5
Keep pressing the Left Cutting button, and then
press the Right Cutting button. Check that the
machine will not run.
6
Release the both Cutting buttons.
7
Exchange the Right and Left Cutting buttons,
and follow the Steps 1 to 6 in the same way.
14044
10301D1
Key Switch
Left Cutting
Button
Right Cutting Button
The machine will run only when both Cutting
buttons are pressed at the same time (within
0.5 seconds).