Standard Horizon PC-P430, Manual

Page: 10 / 36

X
Shortest Return Check
Check that the knife returns to the start position
automatically and stops before the knife reaches
the lower limit.
1
Press and hold the Right and Left Cutting
buttons at the same time.
2
Release one of them as soon as the cutting
cycle is started.
3
Check that the knife lifts, returns to the start
position, and stops as soon as either button is
released.
Auto-Return Check
Check that the knife returns to the start position
automatically and stops after the knife reaches the
lower limit.
1
Press and hold the Right and Left Cutting but-
tons at the same time.
2
Release one or both of them when the knife is
raising after the knife reaches the lower limit.
3
Check that the knife moves up without stopping,
returns to the start position, and stops.
4
Exchange the Right and Left Cutting buttons and
follow the steps from 1 to 3 in the same way.
Cutting Cycle Check
Check the operations of the knife and the clamp.
1
Press and hold the Right and Left Cutting but-
tons at the same time.
2
Check the knife and the clamp operate as the
following orders.
1. The clamp lowers.
2. The knife lowers.
3. The knife lifts.
4. The clamp lifts.
14044
10301D1
Left Cutting Button
Right Cutting Button
14044
10301D1
Left Cutting Button
Right Cutting Button
14044
10301F1
1 2 3 4
Knife
Clamp