Standard Horizon PC-P430, Manual

Page: 7 / 36

VII
This machine has been designed to be as safe as possible. However, if an accident occurs, it can
cause severe personal injury. Before using the machine, always perform the safety checks listed in
this section.
Exterior Check
1
Check that the key switch are off.
2
Check that the safety cover and both of the rear
covers are not broken, removed or the screws
are not loosened.
3
Check that the screws on the knife holder are
not loosened.
4
Check that there is nothing on the table.
Checks Before Operating
- Work alone when you do the
cutting operation.
- If you notice a problem or the
machine is not workinig correctly,
do not try to correct the problem
by yourself. Please turn off the
key switch and notify your local
dealer.
- Do not place your hands or
fingers under the knife or the
clamp.
WARNINGS
104062
10101A1
Rear Covers
Safety Cover
Key Switch
14044
10301B1
Screws on Knife Holder