Standard AccuBindPro2, Operator'S Manual, Page: 10 / 32

Standard Duplicating Machines Corporation AccuBind
Pro
2
Revision 12/17/08 10
1.12 Special Danger Areas
WARNING!
There are hot surfaces within the working area (approx. 290°F / 143 °C).
There is danger of getting burned!
Do not use any flammable liquids near the hot device.
WARNING!
There is danger of getting squeezed in the area of the clamping
jaws.
1.13 Maintenance, Servicing, Troubleshooting
This device requires operator maintenance
. If any malfunctions occur while working with the de-
vice, please consult “Chapter 6 - Troubleshooting” regarding the reasons for the malfunction and
possible corrective action.
If malfunctions occur, which are not described, consult the dealer from whom you purchased your
machine.
1.14 Constructional Changes to the Device
It is not permitted to carry out modifications, extensions or conversions without the manufacturer’s
approval.
Device components that are not in a faultless condition have to be replaced immediately. Use original
spare parts only. For parts bought from an external source it cannot be guaranteed that these have
been designed and manufactured to suit the demands and safety requirements of the device.
1.15 Copyright
The copyright for these operating instructions remains with Standard Duplicating Machines Corpora-
tion.
These operating instructions are only intended for the operator. They contain instructions and notes,
which may not be duplicated either in part or in whole, disseminated or otherwise communicated.
Violation can involve criminal offence consequences.
1.16 Disposal
Taking into consideration the environmental conditions and the local official regulations, AccuBind®
strips may be stored and disposed together with domestic waste.