Standard Horizon Quantum GX5000S, Owner'S Manual

Page: 81 / 100

Page 81 GX5000S
[
6
(
NAV
)] Key
When in radio mode, this key is used to directly select digit “6” in a
channel number.
Secondary use
Press the [ F
] key first then press the [
6
(
NAV
)] key, the LCD will display
NAV GPS Data, Time, SOG (Speed Over Ground), and COG (Course
Over Ground) when a GPS is connected to the accessory cable of the
GX5000S . See section “ 8.3 ACCESSORY CABLE ” for details.
[
7
(
SCRM
)] Key
When in radio mode, this key is used to directly select digit “7” in a
channel number.
Secondary use
Press the [ F
] key then press the [
7
(
SCRM
)] key to toggle the Voice Scram-
bler “on” and “off.” Press the [ F
] key then press and hold the [
7
(
SCRM
)]
key to enable the selection the Voice Scrambler code. Refer to section
“
10.17 VOICE SCRAMBLER ” for details.
[
8
(
PA
)] Key
When in radio mode, this key is used to directly select digit “8” in a
channel number.
Secondary use
Press the [ F
] key then press the [
8
(
PA
)] key to operate the 30 Watt PA
function. Refer to section “ 10.14 PA/FOG OPERATION ” for details.
[
9
(
FOG
)] Key
When in radio mode, this key is used to directly select digit “9” in a
channel number.
Secondary use
Press the [ F
] key then press the [
9
(
FOG
)] key to operate the Fog Horn
function. Refer to section “ 10.14 PA/FOG OPERATION ” for details.
[
0
(
A
)] Key
When in radio mode, this key is used to directly select digit “0” in a
channel number.
Secondary use
Used to select A (alpha channels). Press the desired channel keys then
press and hold [
0
] key until “A” appears next to the channel number and
press [ ENT
] to select the channel.
[
CLR
] Key
Press the [ CLR
] key to cancel the menu selection and/or keypad entry.
[
ENT
] Key
Press the [ ENT
] key to enter the menu selection and/or keypad entry.