Standard Horizon Quantum GX5000S, Owner'S Manual

Page: 29 / 100

Page 29 GX5000S
10.13.3 Priority Scanning
(
P-SCAN
)
In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to the desired channel from the Channel 16 by the Radio
Setup Mode, refer to section “
12.7 PRIORITY CHANNEL SET .”
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the CHANNEL selector knob.
Press and hold the [ SCAN
] key for one second,
“ MEM ” will appear on the display which indicates
the channel has been programmed into the trans-
ceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the [ SCAN
] key until “
MEM ” is removed from the dis-
play.
5. To start priority scanning, press the [ SCAN
] key momentarily. “
P-SCAN P-SCAN
P-SCAN P-SCAN P-SCAN ”
appears on the LCD. Scanning will proceed between
the memorized channels and the priority channel.
The priority channel will be scanned after each pro-
grammed channel.
6. To stop scanning, press the [ 16/9
] or [
WX
] key.
You may change the scan resume time in the Radio Setup Mode, refer to
section “
12.9 SCAN RESUME TIME .”