Standard Horizon Quantum GX5000S, Owner'S Manual

Page: 74 / 100

GX5000S Page 74
13.3 PA/FOG OPERATION
When the RAM+ is connected to the GX5000S it is capable of controlling the
30W Public address, 4 fog horns, bells, and whistles.
13.3.1 Operating the PA / Hailer
1. Press and hold the [ NAV
] key then select PA with the [
S
]
or [ T
] key.
2. Press the [ CALL/SET
] key.
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press
the [ S
] or [
T
] keys to adjust the Audio output level. The
level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [ VOL
] Key, then press the [
S
] or [
T
] key to the
desired listen back volume.
To exit from the PA Hailer mode, press the [ CALL/SET
], [
16/9
],
or [ WX
] key.
13.3.2 Operating the FOG Horn
The GX5000S is capable of sending 4 pre-programmed fog signals and also
Horn, Siren, Aground and Anchor signals.
UNDERWAY: POWER BOAT UNDERWAY
STOPPED: POWER BOAT STOPPED
SAIL: SAIL BOAT, FISH VESSEL, TOW VESSEL
TOW: VESSEL UNDER TOW
1. Press and hold the [ NAV
] key then select FOG with the
[
S
] or [
T
] key.
2. Press the [ CALL/SET
] key.
3. Select the one of the eight functions described above with
the [ S
] or [
T
] key and press the [
CALL/SET
] key.
4. On the “
Horn Horn Horn Horn Horn
” and “
Siren Siren Siren Siren Siren
” modes, press the PTT switch to
activate the tone through the HAIL/PA speaker.
Press the [
S
] or [
T
] keys to adjust the Audio output level.
The level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [ VOL
] Key, then press the [
S
] or [
T
] key to the
desired listen back volume.
To exit from the FOG or other signaling mode, press the [ 16/9
],
[
WX
], or [
CALL/SET
] key.