Standard Horizon Quantum GX5000S, Owner'S Manual

Page: 76 / 100

GX5000S Page 76
13.4.1 Changing GPS Information to Vessel Position or COG
Factory default is “Your Vessel’s Current Position,” however, following the steps
below the GPS Information can be changed to “Course Over Ground (COG).”
1. Press and hold down the [ CALL
(
ENT
)] key until “
RADIO RADIO RADIO RADIO RADIO
SETUP SETUP
SETUP SETUP
SETUP
” menu appears.
2. Press the [ CALL
(
ENT
)] key, then select “
NAV DISPLAY NAV DISPLAY NAV DISPLAY NAV DISPLAY NAV DISPLAY
” with
the [ S
]/[
T
] key.
3. Press the [ CALL
(
ENT
)] key.
4. Press the [ T
] or [
S
] key to select “
Pos Pos
Pos Pos Pos
(Your Vessel’s Cur-
rent Position)” or “
Cru Cru Cru Cru Cru
(Course Over Ground).”
5. Press the [ CALL
(
ENT
)] key to store the data entered, then
press the [ 16/9
] key to exit this menu and return to radio
operation mode.