Standard Horizon Quantum GX5000S, Owner'S Manual

Page: 45 / 100

Page 45 GX5000S
7. When an individual call acknowledgment is re-
ceived, the established channel is automatically
changed to the channel which is selected on
step 5 above and a ringing tone sounds.
8. Press [ CLR
] key to listen to the channel to make
sure it is not busy, then key the microphone
and call the other vessel you desire to com-
municate with.
Manual Calling
You may enter an MMSI number manually to contact without storing it in the
Individual Directory.
1. Press the [ CALL
(
MENU
)] key. The “
DSC Operation DSC Operation DSC Operation DSC Operation DSC Operation
”
menu will appear.
2. Turn the CHANNEL selector knob to select “
Indi- Indi- Indi- Indi- Indi-
vidual vidual
vidual vidual
vidual
.” (To cancel, press the [ CLR
] key.)
3. Press the [ ENT
] key. The transceiver will beep, and
the “Individual directory” will appear.
4. Turn the CHANNEL selector knob to select
“ Manual Manual Manual Manual Manual ,” then press the [ ENT
] key.
5. Turn the CHANNEL selector knob to scroll through
numbers, 0-9. To enter the desired number and move
one space to the right, press the [
ENT
] key. Repeat
this procedure until all nine spaces of the MMSI num-
ber which you want to contact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the [ H/L
(
NAV
)] key until the
wrong number is selected, then turn the CHANNEL selector knob to cor-
rect the entry.
7. When finished entering the MMSI number, press and hold the [ ENT
] key.
8. Turn the CHANNEL selector knob to select
“ Manual Manual Manual Manual Manual ,” then press the [ ENT
] key.
9. Turn the CHANNEL selector knob to select the op-
erating channel you want to communicate on
and press the [
ENT
] key.
10. Press the [ ENT
] key again to transmit the indi-
vidual DSC signal.