Page 72
GX2200E
8.8 POSITION REPORT
The feature is similar to position request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. Your vessel must mark the internal GPS receiver for the
GX2200E
to send the position.
NOTE
To transmit a position report call, the
GX2200E
individual directory
must be programmed with stations you wish to send your position
to. To setup this directory refer to section “
8.5.1 Setting up the Indi-
vidual / Position Call Directory
.”
8.8.1 Transmitting a DSC Position Report Call
DSC Position Report Call using the Individual/Position Directory
1. Press the
CALL
MENU
key. The “
DSC Menu
” will
appear.
)TQWR
#NN 5JKRU
215 4GSWGUV
215 4GRQTV
&KUVTGUU#NGTV/5)
&5% /GPW
+0&+8+&7#.
37+6
5'.'%6
)TQWR
+PFKXKFWCN
#NN 5JKRU
215 4GSWGUV
&KUVTGUU#NGTV/5)
&5% /GPW
215 4'4146
37+6
5'.'%6
215 4GRQTV %CNN
;#'57
/CPWCN
$QD
5VCPFCTF
5WP .KIJV
*14+<10
37+6
5'.'%6
&DWHJRU\
5287,1(
48,7
6(/(&7
6DIHW\
%CVGIQT[4QWVKPG
0COG*QTK\QP
6TCPUOKV!
37+6
;'5
215 4GRQTV %CNN
+&
%CVGIQT[4QWVKPG
0COG*QTK\QP
6TCPUOKVKPI
215 4GRQTV %CNN
+&
%CVGIQT[4QWVKPG
0COG*QTK\QP
37+6
5KPEG
6TCPUOKVVGF
215 4GRQTV %CNN
+&
2. Rotate the
CH
knob to select “
POS REPORT
”.
(To cancel, press the
soft key.)
3. Press the
soft key.
4. Rotate the
CH
knob to select the name in
the directory, then press the
soft
key.
5. Rotate the
CH
knob to select the nature of
call (“
ROUTINE
” or “
SAFETY
”), then press the
soft key.
6. Press the
soft key to send your
position to the selected vessel.
7. Press the
soft key to return to radio
operation.
NOTE
“
SAFETY
” is normally used as the category for position report calls.
However, “
ROUTINE
” should be selected when calling a vessel with
radios of certain legacy models that cannot accept position report
calls categorized as “
SAFETY
”.
