Page 124
GX2200E
16 CMP30
(
RAM3
)
REMOTE MIC OPERATION
When a remote microphone is connected to the
GX2200E
, all VHF, DSC,
setup menus, AIS, Waypoint, Compass functions and PA/Fog modes can be
remotely operated. The
CMP30
’s operation is same as
GX2200E
except the
receiver audio volume setting and squelch level setting. The reason for the
same operation is to make the operation of the radio and
CMP30
mic easy.
For specific operation of the
CMP30
mic review sections in the radio manual.
The
CMP30
is supplied with 7 m of routing cable and can be extended up to
21 m using three 7 m extension cables model
CT-100
. The Intercom feature
can be used between the
CMP30
and the
GX2200E
. In addition, speaker
wires are supplied at the panel mount of the routing cable for external speak-
ers to be connected in noisy environments.
16.1 REMOTE MIC CONTROLS
Key
Toggles between high and low power. When the key is pressed while
the transceiver is on CH13 or CH67, the power is temporarily switched
from LO to HI until the
PTT
switch is released. The key does not func-
tion on transmit inhibited and low-power only channels.
