Standard Horizon MATRIX AIS/GPS GX2200E, Owner'S Manual

Page: 63 / 140

Page 63 GX2200E
1. Press and hold the
CALL
MENU
key until “ Setup
Menu ” appears.
6HWXS 0HQX
&+ )XQFWLRQ 6HWXS
'6& 6HWXS
$,6&RPSDVV6HWXS
*366HWXS
:D\SRLQW 6HWXS
*(1(5$/ 6(783
48,7 6(/(&7
6HWXS 0HQX
&+ )XQFWLRQ 6HWXS
*366HWXS
$,6&RPSDVV6HWXS
*HQHUDO6HWXS
:D\SRLQW 6HWXS
'6&6(783
48,7 6(/(&7
-DSC Setup-
Individual Reply
Individual Directory
Position Reply
Individual Ack
Individual Ring
GROUP DIRECTORY
QUIT SELECT
QUIT SELECT
Edit
Delete
ADD
-Group Directory-
QUIT ENT BACK
Group Name
_
ID:0--------
-Group Directory-
QUIT ENT BACK
Group Name
Horizon
ID:0--------
-Group Directory-
ID:023456789
QUIT ENT BACK
Group Name
Horizon
-Group Directory-
2. Rotate the CH knob to select “ DSC SETUP ”
menu.
3. Press the soft key, then select
“
GROUP DIRECTORY
” with the CH knob.
4. Press the soft key, then select “ ADD ”
with the CH knob.
5. Press the soft key.
6. Rotate the CH knob to scroll through the
first letter of the name of the group you
want to reference in the directory.
7. Press the soft key to store the first
letter in the name and step to the next letter
to the right.
8. Repeat step 6 and 7 until the name is
complete. The name can consist of up to
eleven characters, if you do not use all
eleven characters press the soft key
to move to the next space. This method can
also be used to enter a blank space in the
name.
If a mistake was made entering in the name repeat pressing the
soft key until the wrong character is selected, then rotate the CH knob to
correct the entry.
9. After the eleventh letter or space has been entered, press and hold the
soft key to advance to the group MMSI number entry.
10. Rotate the CH knob to select the second number of the MMSI (nine
digits: first digit permanently set to “0”) which you want to contact, then
press the soft key to step to the next number. Repeat this proce-
dure until all eight spaces of the MMSI number are entered.
If a mistake was made entering in the MMSI number repeat pressing the
soft key until the wrong number is selected, then rotate the CH
knob to correct the entry.
11. To store the data entered, press and hold the soft key.
12. To enter another group address, repeat steps 5 through 11.
13. Press the soft key three times to return to radio operation.